What is the DMX channel of LED Profile Spotlight?

What is the DMX channel of LED Profile Spotlight? Before we answer this question, we need to know some primary knowledge about led profile spotlight. Firstly, the led profile spotlight should install DMX control system; Without DMX control protocol, there will be no DMX channel for it, such as our model TH-343 20W Led Mini Profile with Remote Control. Secondly, what determine the DMX channel of led profile spotlight? Both are classic model th-329 200w led profile spot light provided by The One Studio, the single color version just have three DMX channels, while the 4in1 RGBW have eight channels. This tell us if the led profile spotlight have more than one color, there will be more DMX channels. Therefore, consider color temperature as a breakthrough, next, we will officially discuss what is the DMX channel of led profile spotlight .

In order to well understand, here take our hot-sale product, model th-345 200w/300w die casting aluminum led profile spot light as example. For single color, warm white or cold white, there are only two DMX channels, one is Dimmer, which is from 0-100; the other one is Strobe speed: 1-25times/sec. Normally, Dimmer and strobe are the basic channels for led profile spotlights. Compared with single color, 4 in1 RGBW increase one DMX channels for each color; and one more channel for auto run & sound control (then the total amount is seven). According to this theory, we can easily deduce when the color temperature is adjustable, there is one more DMX channel for it ,such as our model th-348 rgbal die-casting aluminum led profile spot light, CTO is from fully tuneable from 2,700 to 12,000K (RGBAL 5IN1).

Besides color temperature, the other key point is the functions. With the higher request for lighting fixtures, more and more customers look for auto-cutting and auto-zoom profile. The One Studio as a professional LED studio lighting enterprise, we always move forward. This year, we launch out led ip65 rated ellipsoidal (with auto zoom/auto cutting). For single color, this model already have over 10 channels. 8 channels are as position control and angle adjustment. By left, right, up, down, angle change, you can make any cutting via DMX channels. Auto zoom, focus adjustment, Gobo control-optional, iris control-optional, built-in shape cutting, motor reset are separately occupy one channels. Gobo control and iris control are not a must, but the optional; only when client require and install gobo or iris, we can use this DMX channels,otherwise, it is null.